GM TH350 Level 3 Performance Automatic Transmission Package
The TH350 transmission is a proven GM three-speed automatic platform used in classic muscle cars, trucks, hot rods, and custom performance vehicles. This Level 3 TH350 Performance Automatic Transmission Package is designed for compatible applications that require more than a basic stock-style rebuild. Its performance-oriented build combines upgraded friction components, improved oiling and cooling, precision internal clearances, and a high-performance torque converter.
Built around the GM Turbo Hydra-Matic 350 platform, this TH350 performance transmission incorporates upgraded components and additional assembly procedures intended to support demanding street and street/strip applications. It is a consideration for buyers looking to strengthen a classic GM drivetrain or complete a custom engine and transmission project.
Level 3 TH350 transmission build features
The Level 3 build includes upgraded features from the preceding build specification, along with additional components and precision assembly procedures intended to improve durability and transmission operation.
Key Level 3 features include:
- Raybestos Blue Plate Special clutches: Upgraded friction components specified for the Level 3 build.
- Improved oiling and cooling: Internal improvements intended to support lubrication and heat management.
- Precision blueprinting: Internal clearances are carefully measured and configured during assembly.
- High-performance torque converter: A furnace-brazed converter is included in the referenced Level 3 package.
- Upgraded clutch and band components: The build incorporates upgraded friction materials and band specifications from its Level II foundation.
- Reinforced internal components: The underlying build includes a hardened intermediate roller clutch and outer race, plus a wide direct drum bushing.
- Recalibrated valve body: The transmission receives a shift-control setup intended to improve shift quality and operation.
- Drain plug: A drain provision makes future transmission fluid service more convenient.
Exact components and specifications should be confirmed against the final build sheet.
Raybestos Blue Plate Special clutches and upgraded internals
A key feature of this Level 3 TH350 transmission is its Raybestos Blue Plate Special clutch package. These upgraded friction components form part of the transmission’s performance-oriented internal configuration.
The build also incorporates upgraded components from its Level II foundation, including an Alto Red Eagle clutch and band specification, a five-disc direct clutch pack, a wide center support, and a hardened intermediate roller clutch and outer race.
These components work as part of a complete internal assembly. Friction materials, clutch clearances, hydraulic operation, lubrication, and cooling all contribute to how an automatic transmission performs in service.
Improved oiling, cooling, and precision blueprinting
The Level 3 build receives additional attention to oiling, cooling, and internal clearances. These details matter because clutch packs, bearings, bushings, and other internal components depend on appropriate lubrication and hydraulic pressure.
Blueprinting involves carefully measuring and setting internal clearances during assembly rather than relying solely on standard production tolerances. The goal is to configure the transmission’s internal components for the intended application and build specification.
Improved oiling and cooling provisions are also included in the referenced Level 3 configuration. Proper transmission cooling remains important during demanding driving conditions, particularly in vehicles with increased engine output or frequent hard acceleration.
TH350 torque converter and stall converter options
This package includes a high-performance, furnace-brazed TH350 torque converter. The converter is an important part of the drivetrain because its characteristics affect how the engine and transmission work together.
A TH350 stall converter should be selected according to the engine’s torque characteristics, camshaft specifications, vehicle weight, rear axle gearing, tire size, and intended driving conditions. A higher stall speed may be suitable for certain performance combinations, but it is not automatically the right choice for every vehicle.
Before ordering, confirm the included converter’s stall characteristics, bolt pattern, input compatibility, and available upgrade options. Do not assume that an advertised stall speed or optional converter upgrade is included unless it is listed in the actual package specifications.
TH350 transmission applications
The GM TH350 is commonly used in classic Chevrolet and other compatible GM-powered vehicles. Its compact three-speed design also makes it a consideration for custom vehicle projects and selected engine swaps.
Potential applications include:
- Classic Chevrolet muscle cars
- Classic GM passenger cars
- Street rods and hot rods
- Custom performance vehicles
- Compatible small-block and big-block GM engine combinations
- Selected off-road and transfer-case applications when correctly configured
The correct transmission version depends on the engine bellhousing pattern, vehicle layout, output shaft, tailhousing, and installation requirements.
Chevrolet-pattern and Buick/Oldsmobile/Pontiac (BOP) configurations are not automatically interchangeable. Confirm the required bellhousing pattern before purchasing.
TH350 installation and compatibility considerations
Before selecting a TH350 transmission, verify the complete drivetrain combination. Even when the transmission family is correct, differences in engine mounting, output configuration, and vehicle installation can affect compatibility.
Important items to confirm include:
- Engine bellhousing pattern and crankshaft/flexplate compatibility
- Two-wheel-drive or four-wheel-drive configuration
- Output shaft and tailhousing length
- Driveshaft length and yoke compatibility
- Transmission crossmember and mount position
- Torque converter specifications and flexplate compatibility
- Kickdown cable and carburetor or throttle linkage requirements
- Vacuum modulator connection and engine vacuum supply
- Cooler line routing and transmission cooling capacity
- Shifter linkage and speedometer connection
For four-wheel-drive applications, the correct output shaft and transfer-case adapter must be selected for the specific transfer case. Do not assume that a standard two-wheel-drive TH350 can be installed in a four-wheel-drive vehicle without the appropriate conversion components.
TH350 kickdown cable and transmission controls
The conventional TH350 uses a mechanical TH350 kickdown cable to request a downshift under appropriate throttle conditions. Correct cable installation and adjustment are important for proper operation.
The transmission also uses a vacuum modulator to respond to engine load. Its connection and adjustment should be checked during installation.
These systems differ from the electronic controls used by later GM automatic transmissions. A conventional TH350 does not require a modern electronic transmission controller, although the exact vehicle installation may require additional wiring or control provisions for other drivetrain components.
Choosing a TH350 performance transmission
A Level 3 TH350 is worth considering when a standard stock-style rebuild does not match the intended performance requirements. Its upgraded friction components, improved oiling and cooling, precision blueprinting, and high-performance torque converter provide a more specialized build than a basic replacement transmission.
However, selecting the correct transmission still requires matching the build to the engine and vehicle. Engine output, torque characteristics, vehicle weight, axle gearing, tire size, driving style, and cooling capacity all influence the requirements of the finished drivetrain.
A transmission’s build level alone does not establish a universal horsepower or torque rating. Confirm the builder’s rating and recommended application for the exact configuration being supplied.
TH350 transmission for sale: What to check before ordering
If you are comparing options for a TH350 transmission for sale, look beyond the transmission model and advertised build level. Two transmissions carrying the TH350 designation can have different internal components, converter specifications, drivetrain configurations, and installation requirements.
Before purchasing this Level 3 package, verify:
- Whether the unit is rebuilt, remanufactured, or supplied in another condition
- The exact Level 3 internal components included
- Chevrolet or BOP bellhousing configuration
- Two-wheel-drive or four-wheel-drive configuration
- Included torque converter and stall specifications
- Output shaft and tailhousing configuration
- Warranty duration and coverage
- Any optional upgrades or installation components
For custom applications, provide your engine details, vehicle model, drivetrain layout, and intended use so the correct configuration can be confirmed before ordering.
Order a GM TH350 Level 3 performance transmission
Choose the GM TH350 Level 3 Performance Automatic Transmission Package for a compatible drivetrain project that calls for upgraded internal components and a performance-oriented automatic transmission build.
Whether you are upgrading a classic muscle car, building a street rod, or planning a custom GM-powered vehicle, confirm the engine bellhousing pattern, drivetrain configuration, torque converter specifications, output shaft, and requested performance options before completing your purchase.
The correct build specification and installation components help ensure that your TH350 transmission is suited to the complete drivetrain rather than selected by transmission model alone.






Reviews
There are no reviews yet.