MG3 2025+ Facelift Rear Bumper Upper Cover
MG3 rear bumper upper cover for the 2025+ facelift is an aftermarket replacement body panel designed for the new-shape MG3. This listing is for the upper section of the rear bumper only. It does not include the complete rear bumper assembly, lower bumper sections, separate brackets, or trim pieces.
The part is listed under OE reference 11222221-SPRP and is intended for the MG3 2025+ Facelift application. The OE number is provided as a parts-identification reference; it does not mean this is a genuine MG factory component. This is an aftermarket replacement part.
Before ordering, compare the reference number with your original component and confirm compatibility using your vehicle identification number (VIN), registration details, or the original equipment number. The earlier-generation MG3 has different body styling, so do not assume this cover will fit a previous model simply because the vehicle badge is the same.
Product details
| Specification | Details |
|---|---|
| Vehicle make | MG |
| Vehicle model | MG3 |
| Application | 2025+ Facelift |
| Part name | Rear Bumper Upper Cover |
| Part number reference | 11222221-SPRP |
| Part type | Aftermarket replacement |
| Position | Rear |
| Listing coverage | Upper bumper section only |
Designed for the MG3 2025+ facelift
The MG3 received a substantially updated exterior design for its newer generation. Because bumper shapes, mounting points, adjoining panels, and trim arrangements can vary between model generations, selecting the correct replacement section is important.
This MG3 2025+ rear bumper cover is listed for the facelift model’s new-shape body. It should not be treated as interchangeable with the earlier-generation MG3 rear bumper. Even where two vehicles share the MG3 name, their exterior panels may have different profiles and attachment arrangements.
Check the vehicle’s build information before purchasing, particularly if it was registered close to a model change or facelift introduction. Registration year alone may not identify the exact bumper specification.
Upper cover only – other bumper components sold separately
A rear bumper can consist of several individual components rather than one complete interchangeable panel. This listing covers the rear bumper upper cover only.
Other components, including lower bumper sections, mounting brackets, mouldings, and decorative trims, are separate parts and are not included unless specifically stated in the product listing. If your vehicle has sustained rear-end damage, inspect the complete bumper assembly before ordering so you can identify every component that needs replacement.
For example, damage may affect the upper cover while leaving the lower section and brackets usable. In other cases, broken mounting points or damaged adjoining trims may mean additional parts are required. Comparing the damaged assembly with the replacement listing can help prevent ordering an incomplete set of components.
Do not assume that brackets, clips, reflectors, sensors, or other accessories are supplied with this upper cover. Check the individual product details if you need any additional items.
Aftermarket replacement part with OE reference
This product is an aftermarket MG3 bumper component. The reference number 11222221-SPRP helps identify the intended replacement application and provides a useful comparison point when checking the original part.
An OE reference is not, by itself, proof that a component is manufactured by MG or supplied in genuine MG packaging. Buyers looking specifically for a genuine factory part should verify the product grade and branding before purchasing.
When comparing replacement body panels, consider the following:
- Part reference: Compare 11222221-SPRP with the number or reference supplied for your vehicle.
- Vehicle generation: Confirm that your MG3 is the 2025+ facelift model.
- Panel coverage: Make sure you need the upper rear bumper cover rather than the complete bumper or lower section.
- Mounting arrangement: Check that the replacement is listed for your vehicle’s body configuration.
- Additional components: Identify any separate brackets, trims, or bumper sections required for the repair.
These checks are particularly useful when sourcing crash-repair panels, where similar-looking components may have different mounting points or dimensions.
Confirm MG3 fitment before ordering
The listed application is MG MG3 2025+ Facelift, with fitment confirmation required before dispatch. For the most reliable check, provide your VIN or the OE number from the original part.
This is especially important if your MG3 was manufactured or registered around the transition between model versions. A vehicle’s registration date may not always provide enough information to identify the correct replacement panel.
If you are unsure whether this is the correct MG3 rear bumper upper section, have the supplier check the VIN, build details, and original part reference before completing your order. Confirming compatibility in advance can help avoid delays, return freight, and installation issues.
Important information before purchase
- This listing is for one rear bumper upper cover only.
- The product is aftermarket, not a genuine MG factory part.
- OE reference: 11222221-SPRP.
- Listed application: MG3 2025+ Facelift, new shape.
- Earlier-generation MG3 compatibility is not confirmed.
- Lower bumper sections, brackets, trims, and other components are sold separately.
- Confirm fitment with your VIN or original OE number before dispatch.
Choose the correct MG3 2025+ facelift rear bumper upper cover by checking the vehicle details and part reference before ordering. If the original panel number is unavailable, provide the VIN so the application can be checked against the vehicle’s build information.











Reviews
There are no reviews yet.